Solbian SXX 130G
|Part Number:||SXX 130G|
|Peak Power (W):||130W|
|Rated Voltage (V):||15.1 V|
|Dimensions (mm) L x W x H:||754 x 1016 x 2|
|Weight (Kg):||1.8 Kg|
These panels are made to order so may take upto 2 weeks to dispatch.
Solbian SXX 130G – Semi Flexible Solar Panel – More power with HJT cells.
In the SXX series heterojunction solar cells are electrically connected using ultra-thin copper wires that form a very fine mesh on the cell surface, resulting in thousands of contact points. This alternative to the standard bus-bar method allows a higher module power and increases the energy yield. A technology optimally suited to flexible modules, due to its intrinsic insensitivity to micro-cracks, that are the most common cause of energy loss in solar modules.
The SXX series comes at the same size of standard 6 inches cell panels but generates more power, thanks to its silicon-based heterojunction solar cells (HJT) that offer more than 23% of efficiency. When compared with panels of the same nominal power, the SXX prove to harvest more energy due to HJT cells being intrinsically bifacial, an important feature especially when panels are encapsulated in a transparent sandwich and installed with the back exposed to indirect light. To top it all, HJT cells perform better than others in hot climates, thanks to very low temperature coefficients.
Another advantage is a reduced sensitiveness to shading, pushed to the extreme in the Guardian (G)
models where several bypass diodes are inserted thanks to an innovative cell layout. The new
connection technology, together with the use of high efficiency silicon cells, make SX panels especially
powerful and reliable.
✓ High resistance to mechanical stresses thanks to the thin wires thick mesh on the cell surface
✓ Flexible and lightweight (2.2 kg/m2)
✓ Very high efficiency (> 23%)
✓ Low temperature coefficients (at high temperatures HJT cells show an efficiency drop 20% lower
than standard silicon cells)
✓ Extra energy obtained thanks to the bifaciality, especially important for applications where the rear
side of the module intercepts the reflection of light
✓ Completely waterproof and resistant to salt water
✓ Thin (less than 2 mm)
✓ Positive power tolerance (0%, +5%)
✓ Available with different front sheets, many fixing and electrical wiring options
✓ White, black or transparent back sheet
✓ Adaptable to any battery: from 5 to 48 volt, lead-acid or lithium
✓ Designed and manufactured in Italy
Part No SF/SP100
Peak Power (+/- 5%) – Pmax 102W
Rated Voltage – Vmp 18.0V
Rated Current – Imp 5.7A
Open Circuit Voltage – Voc 22.0V
Dimensions (LxWxH) 1109 x 546 x 2
No. of Cells 32