Victron 24V 100A Skylla-TG 3 Phase Charger (1+1)
|Input Voltage Range:||185-264|
|Battery capacity (Ah):||500-1000|
|Dimensions (mm) LxWxH:||365 x 250 x 257|
Victron 24V 100A Skylla-TG Charger (1+1) 3 Phase
24V 100A 1 plus 1 output Battery Charger
The Victron 24V 100A Skylla-TG Charger (1+1) : One full rated output and one 4 Amp output. Charge voltage can be precisely adjusted to suit any battery system. The input for the charger is 230V at 50/60HZ. Charge voltage can be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance. An external sensor allows measuring battery temperature and compensating charge voltage accordingly.
Every TG charger is microprocessor controlled and rapidly charges your battery in three stages. As a result of the stabilized output voltage, TG chargers can be used as a power supply even if no batteries are present. They come with two independent outputs. The second is limited to 4A and intended for topping up your start battery.
As with all Victron chargers the TG comes with a temperature sensor. This can have significant benefits in warmer climates where battery life is adversely affected if the charge voltage is not reduced.
Perfect chargers for any type of battery.
Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. In particular, sealed maintenance free batteries must be charged correctly in order to ensure a long service life. Overvoltage will result in excessive gassing and venting of a sealed battery. The battery will dry out and fail.
Suitable for AC and DC supply (AC-DC and DC-DC operation).
Except for the 3-phase input models, the chargers also accept a DC supply.
Use of TG Chargers as a power supply.
As a result of the perfectly stabilized output voltage, a TG Charger can be used as a power supply if batteries or large buffer capacitors are not available.
- Charges any battery – Wet,Gel or AGM
- Microprocessor controlled
- 2 isolated outputs
- Temp. Compensation
- Voltage sensing