Victron Energy 12V 100A Skylla TG Battery Charger
12V 100A Battery Charger
The Skylla charger system has one full rated output and one 4 Amp output.
The 4 Amp output is intended to maintain an engine start battery. This output is provided by a separate charging circuit to the main outputs. It is a constant voltage float charge output only, to prevent overcharging the engine start battery.
The charge voltage can be precisely adjusted to suit any battery system.
Charge voltage can be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance.
An external sensor allows the user to measure battery temperature and compensate charge voltage accordingly.
FUNCTIONS:
- Controlled charging
- Two outputs to charge 2 battery banks (24V models only)
- Suitable for AC and DC supply (AC-DC and DC-DC operation)
| Part No | VI/SDTG2401001 |
| Input Voltage Range: | 90-265 Vac or 90-400 Vdc |
| Frequency: | 45-65Hz or DC |
| Power Factor: | 1 |
| Charge Voltage ‘absorption’ (V DC): | 14.4 |
| Charge Voltage ‘float’ (V DC): | 13.8 |
| Charge Voltage ‘storage’ (V DC): | 13.2 |
| Charge Current House Batt. (A): | 30 |
| Charge Current Starter Batt. (A): | 4 |
| Charge Characteristic: | 4 Stage Adaptive |
| Battery Capacity: | 100-400 |
| Temperature Sensor: | Yes |
| Can Be Used As Power Supply: | Yes |
| Forced Cooling: | Yes |
| Humidity (non condensing): | Max 95% |
| Operating temp.range: | -20 to +60°C (0-140°F) |
| Battery Connection: | M6 Studs |
| AC Connection: | Screw clamp 4mm |
| Protection Cate: | Studs |
| Weight (Kg): | 3.8 |
| Dimensions (mm) LxWxH: | 350 x 200 x 108 |
